|Place of Origin:
|TUV CB CE RoHS SAA UKCA
|Minimum Order Quantity:
|T/T, L/C at sight, Western Union, Paypal
|700 units per working day
|102,000 Hours (TUV TM21 Report)
|Lumileds LUXEON 5050 / TYF 5050
|IP66 (TUV IP66 Report)
|1800-6500K / PC AMBER
|TUV CB CE RoHS SAA UKCA
SHINING-STAR Series 190lm/W 60W IP66 IK08 Integrated Solar LED Street Light 5 Years Warranty
|Solar Panel Parameters
|Monocrystalline 18V 40W
Monocrystalline 18V 50W
Monocrystalline 18V 60W
Monocrystalline 18V 80W
Monocrystalline 18V 100W
|LiFePO4 12.8V 18AH
|LiFePO4 12.8V 24AH
|LiFePO4 12.8V 30AH
|LiFePO4 12.8V 36AH
|LiFePO4 12.8V 42AH
|Lumileds 5050 / TYF 5050
|TYPE II-S,TYPE II-M,TYPE III-M
|3-4 Days (Auto Control)
|IP66(TUV IP66 report), IK08
|-20℃ to 60℃
|Pure ADC12 Die-cast housing, optical PC lens
As The Market Similar
Solar Light Power
Maintenance of SHINING-STAR 190LM/W IP66 Integrated Solar LED Street Light 5 Years Warranty
Trouble shooting for SHINING-STAR IP66 IK08 Integrated Solar LED Street Light 5 Years Warranty
|Switch does not turn on
|Check whether the switch turns on
|Turn on the switch
|Make the switch short circuit, if it is still lighting up, could judge the switch failure.
|Battery runs out
|Long rainy day or wrong installation site could not charge enough power. Open the system, disconnect the battery and use multimeter to check the voltage of the battery, if voltage less than 11V, then could judge battery runs out or low power cause system could not work.
|Charge battery by solar panel in daytime, and turn off the switch at night to stop discharge, like this, 2 days could full charge the battery.
|Firstly, adjust the DC power supply to voltage 9V and current less than 1A, then connect the positive and negative electrode of DC power supply to LED, if LED could not light, could judge LED failure.
|If confirming LED failure, please contact us to return and replace.
Wrong installation or dust and leaves cover on solar panel cause not enough solor power to battery.
1. Check whether there is dust or leaves covering on the solar panel. 2. Open the system, disconnect the battery and use multimeter to check the voltage of the battery, if voltage less than 11V, that could judge battery runs out or low power cause system could not work.
1. Charge battery by solar panel in daytime, and turn off the switch at night to stop discharge, like this, 2 days could full charge the battery.
2. Clean the solar panel.
Open the light and check if battery is dispalced or outer has been damaged .
Battery maturing, lights used more than 2 years.
1. If damage caused by transportation, please return to our factory for repairing or replacement.
2. Contact us to buy the same type battery if battery maturing.
|Move in the range of detection under the half power lighting condition, if light not turns to full power ,could judge the sensor failure.
|If confirming failure caused by controller or sensor, please return to our factory for repairing or replacement.
|Controller (timer) setting wrong
|Intelligent mode opens due to an exceeding output power of the controller and light flashing.
|Return to our factory to reset or replace the products.
The advantage of our factory to produce SHINING-STAR IP66 Integrated Solar LED Street Light
(1) Have cooperated with a lot of importers from overseas market for more than 12 years.
(2) Experienced in doing business with big customers. Provide OEM service for many brands.
(3) Quick delivery time for decent orders.
(4) Own designing team for new products development.